Slip-On Webbing w/ Dropped End Loop "No Teeth "All Configurations!:

So we here at Piranha just added more to our slip-on hardware to make your life easier

You can now add this piece onto a harness without removing everything off to slide on your new piece!

This will work with our 2" webbing soft "standard" or our stiffer webbing not a problem

We also tumbled these for 48 hours to give them an ultra soft  edge and that will not cut or damage your webbing

We also added a couple of holes so you can add bungee / Latex tubing if you wish too! 1/8" on the smaller holes or 3/16" on the larger holes!

Made from marine grade 304 stainless steel so you know it will not rust for a longer life! 

Overall Width: 3" Inches

End Loop Length ID" 1" inch 

Thickness: 1/8" inch 

 Select from our drop down box below if you want your hardware with either a slight bend on the loop or a 90 degree bend on the loop

If you want the loop part to be on the leftside select Left and if you want the loop on the right you would select rightside. The loop is built to be as you look down when wearing it.