New Color! 6ft / 72" inch Hot Pink Camo SMB "Flapper / Duck Valve bottom"
So here you go we have a High vis Pink camo color.. These are awesome looking smb's do not miss out while we have the limited amount in stock!!
6 Feet Length 6" X 72"
210 Denier with a urethane backing
Approximately 40+lbs of lifting capacity
Small compact design for easy storage with bungee to hold it rolled up or use the velcro strap and that will hold it rolled up! Or use both!!
Our smb has a oral / Bc hose inflator at the bottom or use a Bc hose to quickly inflate our Smb!!
Has a 1" plastic D-ring to attach a slate or light at the top of the Smb
We use a 1" inch stainless steel D-ring at the bottom to clip off quickly
Non-Slip duck valve at bottom allows air into the smb and stay in without dumping out! "Flapper Valve/ Duckbill Valve"
Diver can fill the smb either by your regulator or mouth with the opening at the bottom or quick fill using a Bc hose
Lead weights located inside the smb at the bottom allows smb to stand straight up at the surface better than other smb's plus help keep your duck valve closed
Also by having lead weights at the bottom the opening is easier to work with underwater
This is our Standard size Smb being just under 6" inches overall width and 6 feet long make this the perfect smb for any type of diving
When rolled up we use a bungee to hold your Smb closed and a velcro strap!!!
We also use a larger over pressure relief button to prevent premature blow outs / failures and to remove air quickly when done using our Smb!
Solas reflective tape is near the top on both sides plus the diver down is in reflective material to also help see you!