Our newest Din/K 200 bar valve. Remove insert to make this valve a 200 bar din style valve
Body has a PVD Black finish giving it an awesome look. This is a very durable finish so do not worry it will not come off easliy
Manufactured with oxygen compatible materials and lubricants
Nitrox ready up to 40%
Uses a long length BLACK handwheel "shorter types of handwheels can be used by just replacing it with the longer handwheel
The valve handle has a slight angle back so it is easy to grab by reaching over your right shoulder
Comes with viton tank o'ring, dip tube & BLACK tank handwheel
Valves come sealed
Standard 3/4" threading fits mosts tanks on the market today!
232 Bar
Right hand side
Comes with a 3000 psi burst disk with a burst pressure of 5000 psi.. You can also upgrade the burst disk down below to a 3442 - with a burst of 5250psi or if you want a lower burst pressure to match your cylinders you can also get a 4000 burst pressure one. We will remove and install your upgraded burst disk at no charge if you order one with the valve order..
This valve uses the Blue Steel size burst disks so we always have these in stock to upgrade or change to when rebuilding the valve
Our din plug is made from a solid brass block and when finished we have an electro-plated finish put on it to make it durable and looks great
This new plug has a special pressure release button in the center of the plug! When gas gets trapped inside instead of taking a wrench you just pressure the button and the gas that is trapped releases. This makes removing the plug a snap just make sure you have turned off your main valve
No more losing your expensive gas with these plugs in
This is the fine thread valve end plug with 2 viton o-rings
This version will fit Dive Rite, Edge/Hog, Thermo, Halcyon, Sea Elite and many other manifolds
This model DOES NOT work with Blue Steel, OMS and a few others!
The threads are very fine on this eng plug
We call this one a Left hand version.. When looking at your valve your knob will be on the RIGHT side and you would screw in the end plug on the left side!
This is the fine thread valve end plug with 2 viton o-rings
This version will fit Dive Rite, Edge/Hog, Thermo, Halcyon, Sea Elite and many other manifolds
This model DOES NOT work with Blue Steel, OMS and a few others!
The threads are very fine on this eng plug
We call this one a right hand version.. When looking at your valve your knob will be on the LEFT side and you would screw in the end plug on the right side!
Using this valve special positioning to allow for better hose configuration
This valve is ready for nitrox of up to 40% components!
Our valve uses the same Blue Steel burst disks so if you want or need a different burst pressure you can get them directly from us!
Our valve works with 3/4" cylinder neck threads so they fit most tanks
Burst pressure is rated for 5500 with the burst disks supplied
Rebuild kits will be available this spring!
Piranha's Price: $32.99
Cylinder Valves of Every Type
Valves matched to cylinder material and working pressure.
In stock right now: Left Side Pro Valve Blue Steel 3442 psi / 5250 Burst. Good for High Pressure Steels!, Rebreather Valve BLACK Handwheel, Right Side Pro Valve Blue Steel 3000 psi / 5000 burst pressure. Good for Aluminum Cylinders!, Left Side Pro Valve Blue Steel 3000 psi / 5000 Burst. Good for Aluminum.
