302.494.0982 CustomerCare@PiranhaDiveMFG.com We have Free Domestic Ground Shipping on Orders over $99.99!
Select Page

View Shipping Costs  |  View Shopping Cart  
  1. Home >
  2. Scuba & Dive Gear >
  3. Valves & Manifolds >

  4. Valve End Plugs

Scuba Valve End Plugs & DIN Plugs | Lola & OMS | Piranha Dive

Sort By:
OMS Replacement End Caps! Price is per piece - Product Image
 Piranha's Price: $16.99

OMS Replacement End Caps! Price is per piece

These are the OEM end caps to seal your valves

They are the rounded version which are the ones that replaced the old flat end caps

These you can place on or remove with a 6mm allen wrench. The socket hole is located at the top of the end cap

You are purchasing one ( 1 ) end cap!

 
Back In Stock! Electro-Plated Finish Din Plug "One plug" - Product Image
 Piranha's Price: $8.99

Back In Stock! Electro-Plated Finish Din Plug "One plug"

  • Our din plug is made from a solid brass block and when finished we have an electro-plated finish put on it to make it durable and looks great
  • No more losing your expensive gas with these plugs in
  • Uses a 1 inch wrench for loosening or tightening!
  • Made to withstand a beating and still function
  • Sold as a single!
    •  
    LOLA Thumb Model Pressure Release Plug - Product Image
     Piranha's Price: $24.99
    Item out of stock! Please contact us for arrival dates at piranhadivemfg@yahoo.com

    LOLA Thumb Model Pressure Release Plug

    The Lola din thumb pressure release will help keep your gas in your cylinder while transporting your cylinder. The small profile of the tumbwheel helps keeps the din from opening easily

    This plug also protects water and dirt from entering

    The small profile thumbwheel helps keep your gas in but yet you can also release any pressure by an easy twist of the cap!

     
    Electro-Plated Finish Din Plug w/ Pressure Release Button "One plug" - Product Image
     Piranha's Price: $25.99

    Electro-Plated Finish Din Plug w/ Pressure Release Button "One plug"

  • Our din plug is made from a solid brass block and when finished we have an electro-plated finish put on it to make it durable and looks great
  • This new plug has a special pressure release button in the center of the plug! When gas gets trapped inside instead of taking a wrench you just pressure the button and the gas that is trapped releases. This makes removing the plug a snap just make sure you have turned off your main valve
  • No more losing your expensive gas with these plugs in
  • Uses a 1 inch wrench for loosening or tightening!
  • Made to withstand a beating and still function
  • Sold as a single!
    •  
    New Style! End Plug Right Side for Blue Steel Valves Only - Product Image
     Piranha's Price: $8.99

    New Style! End Plug Right Side for Blue Steel Valves Only

  • Made out of Stainless Steel
  • New style with rounded end cap! Use a 6mm Allen wrench to tight or loosen
  • For use with LEFTHAND valve use
  • End Plugs are Nitrox ready up to 40%
  • End plugs are used on modular valves or manifolds
  • Great item when breaking down doubles to singles or the same with "H" valves
    •  
    End Plug "Fine Thread" NO Notch Rightside Plug - Product Image
     Piranha's Price: $8.99

    End Plug "Fine Thread" NO Notch Rightside Plug

  • This is the fine thread valve end plug with 2 viton o-rings
  • This version will fit Dive Rite, Edge/Hog, Thermo, Halcyon, Sea Elite and many other manifolds
  • This model DOES NOT work with Blue Steel, OMS and a few others!
  • The threads are very fine on this eng plug
  • We call this one a right hand version.. When looking at your valve your knob will be on the LEFT side and you would screw in the end plug on the right side!
    •  
    End Plug Left Side For Bluesteel Valves Only! - Product Image
     Piranha's Price: $8.99

    End Plug Left Side For Bluesteel Valves Only!

  • Made out of Stainless Steel
  • New style with rounded end cap! Use a 6mm Allen wrench to tight or loosen
  • For use with RIGHTHAND valve use
  • End Plugs are Nitrox ready up to 40%
  • End plugs are used on modular valves or manifolds
  • Great item when breaking down doubles to singles or the same with "H" valves
    •  
    End Plug "Fine Thread" Notch Version Leftside Plug - Product Image
     Piranha's Price: $8.99

    End Plug "Fine Thread" Notch Version Leftside Plug

  • This is the fine thread valve end plug with 2 viton o-rings
  • This version will fit Dive Rite, Edge/Hog, Thermo, Halcyon, Sea Elite and many other manifolds
  • This model DOES NOT work with Blue Steel, OMS and a few others!
  • The threads are very fine on this eng plug
  • We call this one a Left hand version.. When looking at your valve your knob will be on the RIGHT side and you would screw in the end plug on the left side!
    •  

    Valve End Plugs and DIN Plugs

    Keep water and grit out of an open valve.

    In stock right now: End Plug Fine Thread NO Notch Rightside Plug, OMS Replacement End Caps! Price is per piece, LOLA Thumb Model Pressure Release Plug, End Plug Left Side For Bluesteel Valves Only!, New Style! End Plug Right Side for Blue Steel Valves Only.

    Related Categories

    Cart 7 Shopping Cart