Hot Deals & New Dive Gear | Piranha Dive

• We now are offering one of the highest quality #18 dive line on the market!
• With our high viz safety orange with a blue tracer this line is easy to follow while underwater!
• Looking for the best quality dive line than check out our professional grade line and see the difference
• Our line is negatively buoyant
• Our line is made with a tighter wound in a diamond braid that is made without a core design construction for better overall abrasion resistance and minimal stretch.
• Our line is made with colored Polyester that does not bleed out like the cheaper lines. Our Dacron line is made out of Polyester material which results in the best dive line you can use!
• This is a #18 line which is common for most diving applications
• Need or want a extremely high viz underwater line? This is the line you have been waiting for
• Unlike most other dive lines on the market our professional quality line has very little stretch
• The process also allows our line to have a tighter wound which creates a more abrasion resistance dive line
• The manufacturing process builds our line to reduce the twist and kinking like lesser quality dive lines
• Selecting a color line? Not a problem our line does not bleed out like other dive lines making our professional dive line retain its color much longer
• We package our professional line on 1lb spools which hold roughly 900+ plus footage. These are small spools which hold the line not tubes which allow line to roll off...

   

• We also have one more process done to our dive line that makes it totally round and hard, but still remains very flexible for use. This is a heating process takes the torque out of the line, and totally reduces any preshrinking of the line. This heating process also reduces the stretch out of this line thus making an excellent dive line. We do not know of another company that uses these steps to build there dive line. We work directly with our manufacturer to get the best line for you

• We now are offering one of the highest quality #18 dive line on the market!
• With our high viz safety orange with a neon yellow tracer this line is easy to follow while underwater!
• Looking for the best quality dive line than check out our professional grade line and see the difference
• Our line is negatively buoyant
• Our line is made with a tighter wound in a diamond braid that is made without a core design construction for better overall abrasion resistance and minimal stretch.
• Our line is made with colored Polyester that does not bleed out like the cheaper lines. Our Dacron line is made out of Polyester material which results in the best dive line you can use!
• This is a #18 line which is common for most diving applications
• Need or want a extremely high viz underwater line? This is the line you have been waiting for
• Unlike most other dive lines on the market our professional quality line has very little stretch
• The process also allows our line to have a tighter wound which creates a more abrasion resistance dive line
• The manufacturing process builds our line to reduce the twist and kinking like lesser quality dive lines
• Selecting a color line? Not a problem our line does not bleed out like other dive lines making our professional dive line retain its color much longer
• We package our professional line on 1lb spools which hold roughly 900+ plus footage. These are small spools which hold the line not tubes which allow line to roll off...

   

• We also have one more process done to our dive line that makes it totally round and hard, but still remains very flexible for use. This is a heating process takes the torque out of the line, and totally reduces any preshrinking of the line. This heating process also reduces the stretch out of this line thus making an excellent dive line. We do not know of another company that uses these steps to build there dive line. We work directly with our manufacturer to get the best line for you

We got a special deal on these to fit many of our dive products in metric

Don't worry about where they are in the high viz orange body

Sizes: Hex Head 

3mm

4mm

5mm

6mm

8mm

• So we now we got in our brand new titanium buckles in durable BLACK finish! 
• These are lightweight under 3oz's and ultra durable to take any harsh diving conditions you may encounter
• These are the first buckles we were able to get in black and work smoothly so you would not have an issue 
• 3 Slot to lock webbing in place
• Curve buckle aids in comfort
• Easy large handle release

• So we now we got in our brand new titanium buckles in durable light grey / sliver finish! 
• These are lightweight under 3oz's and ultra durable to take any harsh diving conditions you may encounter
• These are the first buckles we were able to get in black and work smoothly so you would not have an issue 
• 3 Slot to lock webbing in place
• Curve buckle aids in comfort
• Easy large handle release

So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below

The flapper valve allow you to put air in your smb and holds it in until you release it

We also have leaded magnetic  weights to help keep your bottom closed and keep your smb from laying flat at the surface

1" inch stainless steel connection right at the bottom to clip onto your smb

1" inch plastic d-ring at the top to connect your light or dive slate

Solas reflective tape goes around the top 

We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use

Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate

420 Orange Denier material makes it a durable smb for use anywhere

6 feet tall by 7" inches wide

So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below

The flapper valve allow you to put air in your smb and holds it in until you release it

We also have leaded magnetic  weights to help keep your bottom closed and keep your smb from laying flat at the surface

1" inch stainless steel connection right at the bottom to clip onto your smb

1" inch plastic d-ring at the top to connect your light or dive slate

Solas reflective tape goes around the top 

We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use

Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate

420 Pink Denier material makes it a durable smb for use anywhere

6 feet tall by 7" inches wide

So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below

The flapper valve allow you to put air in your smb and holds it in until you release it

We also have leaded magnetic  weights to help keep your bottom closed and keep your smb from laying flat at the surface

1" inch stainless steel connection right at the bottom to clip onto your smb

1" inch plastic d-ring at the top to connect your light or dive slate

Solas reflective tape goes around the top 

We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use

Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate

420 Pink Denier material makes it a durable smb for use anywhere

So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below

The flapper valve allow you to put air in your smb and holds it in until you release it

We also have leaded magnetic  weights to help keep your bottom closed and keep your smb from laying flat at the surface

1" inch stainless steel connection right at the bottom to clip onto your smb

1" inch plastic d-ring at the top to connect your light or dive slate

Solas reflective tape goes around the top 

We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use

Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate

420 Orange Denier material makes it a durable smb for use anywhere

• Our compact hand spool has an enclosed plastic body
• Uses a slide on the back side to lock the line in position or unlock it to release line! Easy to hold in one hand with or without gloves to use
• Comes with 150ft of WHITE line
• Reel the enclose spool with the handy knob on the side
• You can remove the center spool by depressing the center 2 tabs to clean and / or change line
• There is enough room on the spool to add more line if you want
• Has a raised clip hole to clip off a snap or add a split ring to help carry on your side!
• Also comes with a wrist lanyard
• And a BRASS 4 inch double ender
• Want a stainless steel double ender than upgrade by selecting below
• Dimensions: Outside OD: 3 1/2 inches 2.0 inches wide

• Our compact hand spool has an enclosed plastic body
• Uses a slide on the back side to lock the line in position or unlock it to release line! Easy to hold in one hand with or without gloves to use
• Comes with 150ft of white line
• Reel the enclose spool with the handy knob on the side
• You can remove the center spool by depressing the center 2 tabs to clean and / or change line
• There is enough room on the spool to add more line if you want
• Has a raised clip hole to clip off a snap or add a split ring to help carry on your side!
• Also comes with a wrist lanyard
• And a BRASS 4 inch double ender
• Want a stainless steel double ender than upgrade by selecting below
• Dimensions: Outside OD: 3 1/2 inches 2.0 inches wide

• Our compact hand spool has an enclosed plastic body
• Uses a slide on the back side to lock the line in position or unlock it to release line! Easy to hold in one hand with or without gloves to use
• Comes with 150ft of white line
• Reel the enclose spool with the handy knob on the side
• You can remove the center spool by depressing the center 2 tabs to clean and / or change line
• There is enough room on the spool to add more line if you want
• Has a raised clip hole to clip off a snap or add a split ring to help carry on your side!
• Also comes with a wrist lanyard
• And a BRASS 4 inch double ender
• Want a stainless steel double ender than upgrade by selecting below
• Dimensions: Outside OD: 3 1/2 inches 2.0 inches wide

• Our transfill whip has 300 bar DIN connectors on each end
• Each Gauge is oil filled to ensure accuracy and durablility
• Large gauge face makes reading easy and simple in either PSI or BAR!
• Gauge has both PSI and BAR Scale in 100 PSI increments
• Our high pressure hose is roughly 60" inches long
• Bleed valve at the bottom of the SPG guage area allows you to maintain a high accuracy and better control when using
• You can use our whip in multiple ways such as to equalize cylinders, transfill from "doubles banks" or filling smaller rebreather bottles
• Note: This whip moves your gas slower than our standard whip so please keep this in mind when purchasing. Uses a smaller bore hose which allows gas to move from 1 cylinder to another just at a slower rate!
• ***NOTICE: Our whips are sent with the pressure gauge not conntacted to protect from damage during shipping! You just remove the one port plug and screw in the gauge.. DO NOT USE teflon tape or anything on the threads just screw it in! 

• Our transfill whip has 300 bar DIN connectors on each end so you can fill to any din system
• Our Gauge is oil filled to ensure accuracy
• Large 2" inch gauge face makes reading easy and simple in either PSI or BAR!
• Gauge has both PSI and BAR Scale in 100 PSI increments
• Our high pressure hose is roughly 60" inches long and is made out of a tough kevlar inner braided material with a poylmer outer shealth
• Rotating bleed valve knod located just under the gauge allows you to maintain a high accuracy and better control when filling your cylinders
• This is our larger bore transfill hose in diameter which will allow you to move your air / mix faster from one cylinder to another! 
• You can use our whip in multiple ways such as to equalize cylinders, transfill from "doubles banks" or filling smaller rebreather bottles
• ***NOTICE: Our whips are sent with the pressure gauge not conntacted to protect from damage during shipping! You just remove the one port plug and screw in the gauge.. DO NOT USE teflon tape or anything on the threads just screw it in! 

Ok so folks have been asking for these and we got in our first batch of them in!

They have a 90 degree flat lip so with or without a glove you can open like a breeze and reduces your chances of line entanglement using these!

1/2" inch small bump eyelet. No wasted space

9/16 Gate opening gives you a large opening to clip onto with or release from

3 1/4" overall length 

Small compact frame for durability

Stainless steel with a stainless spring means long life with reduce chances of rust formations 

Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!

This double ender is made of 316 stainless steel

Has large gate opening 9/16" inches

Overall length 3 1/8" inch 

3/4" inch eye loop ID measurement 

This is our flat lip model! Still easy to operate and use in harsh diving conditions

Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off! 

Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!

This double ender is made of 316 stainless steel

Has large gate opening 9/16" inches

1" inch eye loop ID measurement 

3 7/8" end to end overall measurement roughly 

This is our flat lip model! Still easy to operate and use in harsh diving conditions

Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off! 

Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!

This double ender is made of 316 stainless steel

Has large gate opening 9/16" inches

Overall length 4 1/4" inch 

Large 1 1/2" inch eye loop ID measurement 

Eye loop is a 5mm thick loop 

This is our flat lip model! Still easy to operate and use in harsh diving conditions

Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off! 

Ok so folks have been asking for these and we got in our first batch of them in!

They have a 90 degree flat lip so with or without a glove you can open like a breeze and reduces your chances of line entanglement using these!

1 1/2" inch Large OFFSET eyelet. No wasted space. Now you can place a finger even with drysuit gloves on to make your diving even safer!!

1/2" inch Gate opening gives you a large opening to clip onto with or release from

4 1/4" overall length

Small compact frame for durability with a LARGE OFFSET Eyelet makes diving with gloves a beeze now

Stainless steel with a stainless spring means long life with reduce chances of rust formations

We just had these made for us and shipped in! We added this new size for you folks wanting a smaller size!!! 

Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before. 

Our newest size is just the right size when carrying finger spools or clipping off you now can select our smaller double ender! 

This double ender is made of 316 stainless steel

This double ender has a flat lip on the both sides of the contact slides! 

Has large gate opening 1/2" inches with an overall length of 3 1/2" inches long

Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate

Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off! 

Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before. 

This double ender is made of 316 stainless steel

This double ender has a flat lip on the both sides of the contact slides! 

Has large gate opening 9/16" inches

Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate

Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off! 

• These are brand new never used Low Pressure Braided hoses we got a special deal on and we are passing the savings on to you.
• Each hose comes in a sealed bag   
• Our Braided hoses are CE Tested and Approved!
• NOTICE: Our braided hoses use a polyether-TPU and NOT the polyester-TPU that is causing internal issues with some hoses.  
• Our new hoses are a double braided type low pressure hose
• More than 30% lighter compared to standard hoses
• Made with a kink free airflow design that does not allow our hose to be obstructed
• Abrasion resistant material reduces nicks or cuts
• Fits a standard inflator connection
• Made with UV resistant safety braid which allows these hoses a longer life span than traditional hoses
• Bc Pressure hoses have a 3/8" fitting and will fit most of todays first stages
• Working pressure of 1500 psi ensures against hose failures and is 3 times that of a standard hose!
• Burst pressure rating of 7000 psi gives you that extra safety margin and is 3 times higher than a standard rubber hose
• Black Only

• These are brand new never used high pressure braided hoses we got a special deal on and we are passing the savings on to you.
• Each hose comes in a sealed bag 
• These are limited qty's so if your looking you may want to et them before these are gone at this price! 
•  Our Braided hoses are CE Tested and Approved!
• Our hoses are made out layers of TPEE / Nylon Fiber material
• Our new hoses are a double braided type high pressure hose
• More than 30% lighter compared to standard hoses
• Made with a kink free airflow design that does not allow our hose to be obstructed
• Abrasion resistant material reduces nicks or cuts
• Made with UV resistant safety braid which allows these hoses a longer life span than traditional hoses
• Our Braided High Pressure hoses have a 7/16 fitting and will fit most of todays first stages
• Working pressure of 5000 psi ensures against hose failures
• Burst pressure rating of 22,000 psi gives you that extra safety margin
• Smaller diameter hose at only 7/16 or 10.5mm
• Great HP hose for your single pressure gauge or stage/pony gauge
• Our hoses are tested and meet the SGS bursting standards and also comply with EN 250 Standard
• Braid color is black only
• This hose is made outside of the USA
• BLACK ONLY!
• Don't forget to check out our SPG's located in our gauge section! When purchasing both an hp hose and Spg you can save a few $$$ as a combonation purchase. We carry both 2 & 2.5 inch size Spg's with glass faces
• NOTICE: Our braided hoses use a polyether-TPU and NOT the polyester-TPU that is causing internal issues with some hoses.  

• These are brand new never used high pressure braided hoses we got a special deal on and we are passing the savings on to you.
• Each hose comes in a sealed bag   
• Our Braided hoses are CE Tested and Approved!
• Our hoses are made out layers of TPEE / Nylon Fiber / Kevlar material
• Our new hoses are a double braided type high pressure hose
• More than 30% lighter compared to standard hoses
• Made with a kink free airflow design that does not allow our hose to be obstructed
• Abrasion resistant material reduces nicks or cuts
• Made with UV resistant safety braid which allows these hoses a longer life span than traditional hoses
• Our Braided High Pressure hoses have a 7/16 fitting and will fit most of todays first stages
• Working pressure of 5000 psi ensures against hose failures
• Burst pressure rating of 22,000 psi gives you that extra safety margin
• Smaller diameter hose at only 7/16 or 10.5mm
• Great HP hose for your single pressure gauge or stage/pony gauge
• Our hoses are tested and meet the SGS bursting standards and also comply with EN 250 Standard
• Braid color is black only
• This hose is made outside of the USA
• BLACK ONLY!
• Don't forget to check out our SPG's located in our gauge section! When purchasing both an hp hose and Spg you can save a few $$$ as a combination purchase. We carry both 2 & 2.5 inch size Spg's with glass faces
• NOTICE: Our braided hoses use a polyether-TPU and NOT the polyester-TPU that is causing internal issues with some hoses.  

Stainless steel flexible design 90? for connection bottles 200 Bar.

The hose is designed primarily for air and nitrox.

When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.

For long-term storage, we recommend closing both 2 valves on the instrument.

Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar

Length: 18in/46cm long

Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration

Stainless steel flexible design 90? for connection bottles 200 Bar.

The hose is designed primarily for air and nitrox.

When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.

For long-term storage, we recommend closing both 2 valves on the instrument.

Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar

Length: 20in/51cm long

Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration

Stainless steel flexible design 90? for connection bottles 200 Bar.

The hose is designed primarily for air and nitrox.

When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.

For long-term storage, we recommend closing both 2 valves on the instrument.

Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar

Length: 21 1/4" inches/54cm long

Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration

• We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
• Our first stage has 1 7/16 high pressure port
• It also has 4 3/8 low pressure ports to meet all your equipment add on needs
• Intermediate Pressure 135-145 psi
• This is a balance piston system
• Need a drysuit inflation system add this first stage and build a less expensive system!
• Use this first stage on your stage or pony bottles
• And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
• High quality plastic screw to turn easy
• This a 300 bar din fitting so it works on both a 300 or 200 bar valve!
• You will not find a better valve for a quality first stage as this one!
• This part is NITROX READY right out of the packaging!
• Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
• NOTE: When ordering a rebuild kit order the #AS-101-Kits kit!

• We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
• Our first stage has 1 7/16 high pressure port
• It also has 4 3/8 low pressure ports to meet all your equipment add on needs
• Intermediate Pressure 135-145 psi
• This is a balance piston system
• Need a drysuit inflation system add this first stage and build a less expensive system!
• Use this first stage on your stage or pony bottles
• And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
• High quality plastic screw to turn easy
• This a 300 bar din fitting so it works on both a 300 or 200 bar valve!
• You will not find a better valve for a quality first stage as this one!
• This part is NITROX READY right out of the packaging!
• Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
• NOTE: When ordering a rebuild kit order the #AS-101-Kits kit!

• We use a rigid 2 inch 5mm stainless steel d-ring bent at a 45 degree angle
• This d-ring is tig wielded to our 2 inch wide slide with NO TEETH but uses a heavy duty tri-glide of 3mm thick! This is one tough d-ring with an even tougher tri-glide
• This angle allows you to clip off any item easy while diving
• We also use a slightly wider slot opening if you need it: 1/4" Slot opening
• Made from marine 316 grade stainless steel

• This is our widest opening tri-glide with no teethmore than a standard one and we have improved this slider uses a heavy duty commercial grade thick 3mm base
• We also use a 316 grade of stainless steel improving it from rusting in salt water use!
• This is our commericial grade version which allows you to use thicker webbing or looping two pieces of webbing through will not be an issue with this webbing
• For when you need to run two "2" pieces of webbing thru a slot not an issue here.. No more fighting to get your webbing thru with this slide it now is simple and holds your webbing securely in place
• Overall dimensions: 1" inch wide x 2 7/16 long with a slot opening of 1/4" and a 3mm thick base

We have a new line cutter that allows you to quickly cut line from snagging on your dive gear

We use a high quality ceramic blade which is very tough and durable over the long run plus no chance on any rusting

We built our line cutter with 2 screws/bolts if you ever need to replace the blade on this cutter

We also built the knife pocket with plenty of drainage holes that also allow air to help reduce the drying time. Our sheath has a slot on the backside to be used with any 2" inch webbing

We also have a large finger opening to grip your knife to remove and replace back into the sheath

We also added a 1/8" inch hole on the knife body so if you want use bungee or latex tubing to make a wrist holder if you choose. You will notice on the bottom side of the knife sheath if you use bungee it can loop down around that to even better grip

NOTICE: We give you 10" inches of 1/8" inch black bungee cord to create your holder

Now the fun part! Below you can choose the color of your sheath, main knife body and even the blade holder to truely make your knife a one of a kind!

NOTICE: These are built to order so please do not order overnight, 2nd or 3rd day shipping allowing us to build your knife the way you want it

We used to sell those and were asked to bring them back since they worked so well

We use a 2" 6mm D-ring with a square bar stock to allow it to slide and also have a positive lock when not sliding

HOG Horizon Single Lens Mask

Premium Performance, Universal Fit & Unmatched Comfort

Try the ultimate underwater view with the HOG (Highly Optimized Gear) Horizon Mask. Engineered for clarity, durability, and unparalleled underwater comfort, this single-lens mask is a must-have addition to your retail inventory. Whether your customers are recreational reef explorers or demanding technical divers, the Horizon delivers professional-grade performance that keeps them comfortable for hours.

• The Ultimate Face Fitment & Comfort: Built with an ultra-soft, premium-grade surgical silicone skirt, the Horizon is designed to contour seamlessly to a wide variety of facial profiles. The advanced skirt design creates a secure, leak-free seal without leaving harsh pressure marks, ensuring an incredibly comfortable face fitment that eliminates jaw fatigue and facial tension during long multi-dive days.

• Expansive, Crystal-Clear View: The low-volume, single-lens design brings the tempered glass closer to the eyes. This dramatically expands the peripheral field of vision and reduces the internal air volume, making clearing effortless and enhancing overall diving comfort.

• The Ultimate All-In-One Comfort Bundle: This isn't just a mask; it's a complete protective and comfort-enhancing system. Each Horizon mask comes fully loaded with premium retail extras:

  • Neoprene Strap Wrapper: Over-the-head comfort at its finest. It completely eliminates hair pulling, tangles, and painful strap twisting, evenly distributing pressure across the back of the head.

  • Hard Shell Travel Case: A rugged, zippered EVA case to protect the mask from heavy gear bags and rough boat rides, keeping their favorite piece of gear pristine.

  • Microfiber Cleaning Towel: Keeps the lens spotless, defogged, and ready for action.

HOG Anti-Fog Mask Film | 3-Part Hydrophilic Technology

Never let a foggy mask ruin your view again. Whether you are technical diving in the deep ocean or snorkeling along a vibrant reef, crystal-clear vision is non-negotiable. The HOG Anti-Fog Mask Film provides a long-lasting, reliable barrier against condensation, ensuring you enjoy uninterrupted, high-definition views on every single dive.

Designed for high performance and rugged durability, this advanced 3-layer hydrophilic film adheres directly to the inside of your mask lens, delivering a professional-grade anti-fog solution that lasts for up to a full year.

Key Features

• Crystal-Clear Performance: Completely eliminates annoying lens fogging so you can focus on the marine life, your gauges, and your dive plan--not on clearing your mask.

• Long-Lasting Durability: Forget spraying or spitting in your mask before every entry. One seamless application provides up to a 1-year lifecycle of reliable anti-fog protection.

• Easy 3-Step Application: Features a smart, numbered 3-part layering system (1. Backing, 2. Anti-Fog Middle, 3. Front) that ensures a smooth, bubble-free installation every time.

• Enhanced Compatibility: Engineered to work perfectly on its own, or it can be paired with standard diving mask anti-fog drops for ultimate, heavy-duty fog prevention in extreme environments.

Installation & Maintenance Instructions

Pro Tip: For the best results, ensure your mask lenses are completely clean and free of any factory silicone residue (new masks should be scrubbed with a mask pre-cleaner or white toothpaste) before applying the film.

1. Prep the Lens: Thoroughly clean and dry the inside of your mask lens. Use an alcohol prep pad if available to remove any remaining oils or fingerprints.

2. Peel & Align (Layer 1): Gently peel away Layer 1 (Backing) to expose the adhesive side. Carefully align the film with the inside of your mask lens.

3. Apply & Smooth: Press the film firmly onto the lens, starting from the center and moving outward to push out any trapped air bubbles.

4. Remove Protective Top Coat (Layer 3): Once the film is securely in place and smoothed out, carefully peel away Layer 3 (Front) to reveal your ultra-clear, active anti-fog surface.

5. Post-Dive Care: After diving, simply rinse your mask with fresh, clean water. Avoid rubbing the inside of the lens with abrasive towels, as this can scratch or degrade the hydrophilic film.

So Piranha added to our line up of products more color! With Piranha you now can get your 1/8" Black bungee and now select your bungee holder color and your final length of where you wish it to sit on your chest area!

We first start with a long piece of bungee in fact it is 3 feet in length Why you ask so you can make it a long or short necklace and our neck sizes vary so to make sure your covered we added it slightly longer for you!. You can then adjust your necklace from the one end we left undone to get your final adjustment right for you! When you get your size just cut the bungee and tie an overhand knot to slip up to your color holder and your done. No more getting them to short or way to long adjust to your size easy we done most of the work for you now complete your necklace

So you can select from our drop down box on the color you want to make your necklace holders! With Piranha you now can have a splash of color on many items making your diving fun but also expressing you!

We leave one end of our bungee necklace without a overhand knot. So below we give you some helpful hints on the best way to get your new necklace just right.

*Remember we leave one end untied so you can get your final sizing to fit you

* When your wearing your diving suit being a wetsuit or drysuit you want to have it on so you can your hang length correct. You also can do this without donning your suit just know it will slightly chage your hang location

* With the regulator slipped into the 1/8" bungee slot to hold it tightly you can now go to the next step

* With your suit on if you want and the regulator in place pull the unknotted end to adjust your length to where you want it to sit for you. You can also guess at the length based on the type of suit you use knowing where it will drop to

* Once you got that remove the necklace and slightly pull the bungee out from the holder like a 1/4" inch then tie an overhand knot and trim the bungee

* Heat the end with a lighter or anything to just seal the bungee cord from running on you near your knot

* Next slide your mouthpiece back into the bungee where your knot will now sit slighty in your color bungee holder. Maybe 1/3 in the holder just enough to be out of the way

We have now added another great idea which holds your power inflation hose "Bc" tight to your corrugated hose to reduce snags or catching on objects during your dive

This works with any ROUND corrugated hoses only! If you have an oval or flat type of corrugated hose please see our other listing

We added 11 colors to choose from with one even glow in the dark green

Add a splash of color to your dive rig and make it standad out with these little clips

They are also strong and durable plus UV resistand from fading

These clips will hold either rubber or braided power inflator / Bc type hoses while stream lining your rig with nothing hanging out

We have now added another great idea which holds your power inflation hose "Bc" tight to your corrugated hose to reduce snags or catching on objects during your dive

This works with any Oval / Flat corrugated hoses only! If you have an oval or flat type of corrugated hose please see our other listing

We added 11 colors to choose from with one even glow in the dark green

Add a splash of color to your dive rig and make it standad out with these little clips

They are also strong and durable plus UV resistand from fading

These clips will hold either rubber or braided power inflator / Bc type hoses while stream lining your rig with nothing hanging out

Perfect little lanyard to clip off on items to secure to your diving rig

We use a 550 heavy duty para-cord with a 3/8" swivel bolt snap in 316 stainless steel

Overall length: 10 inches

Lanyard loop is 5 1/4" inch

• Our Latest Mouthpiece in our tough bite line is design is for divers who like to bite into your mouthpiece and gives you a solid feeling! This will reduce the amount of mouthpieces you go through during a normal dive season plus with the added front mouthguard it allows for a more comfortable diving experience. Divers using a bungee necklace will also enjoy that the front mouthguard will keep the bungee from brothering you duting your dive
• We carry a wide range of colors to make your diving rig yours and yours alone! We are adding many new products with colors to help you stand out from the crowd and when on a dive boat you know your diving rig!! 
• Also an excellent choice for cold water dives where you tend to bite or clamp down harder on your mouthpiece or want a more secure feeling holding your regulator this is an excellent choice
• Need a holder for this design mouthpiece? Select our mouthpiece holder called "Tough Bite" design to fit this mouthpiece!
• Our silicone mouthpiece is comfortable to wear during long dives
• The silicone used makes using this mouthpiece very flexible, soft feeling and comfortable in your mouth while diving
• For a more secure hold of your regulator in your mouth this could be just what you have been looking for

• This is an awesome value for a color mounting bezel compass! Compare our price and see for yourself
• Our compass also comes with bungee so it is always tight on your wrist!
• Our compass as a 360 degree bezel so you can rotate to your heading and find your way home
• Also has a 25+ degree tilt so it works almosts at any angle
• Also has a side window to get your reading from!
• Lastly there is an open loop near the top if you wish to clip off

• This is an awesome value for a color mounting bezel compass! Compare our price and see for yourself
• Our compass also comes with bungee so it is always tight on your wrist!
• Our compass as a 360 degree bezel so you can rotate to your heading and find your way home
• Also has a 25+ degree tilt so it works almosts at any angle
• Also has a side window to get your reading from!
• Lastly there is an open loop near the top if you wish to clip off

• So you ask for a larger finger spool and we now got our first batch in and since they sold so well we broght you more colors to choose from
• Here is one of our finger spools but with NEW FLAT LINE in smaller width Yellow line taking up less space on your finger spool!
• This finger spool also has a line leader to start going to our commercial Stainless steel line swivel!
• This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
• Smooth LARGE center finger hole " 1 1/4" inch!
• With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
• Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
• With our hard anodized aluminum spool their is no rust formation
• Dimensions: 3 1/2" inch diameter / 1 3/4" inch overall width with a LARGE 1 1/4" inch finger hole
• If you need a double ender we have you also covered with many choices from our drop down box!!!

We have these fun mini smb's to play with! These are very limited in stock right now so grab one and have some fun with them

They are roughly 9 3/4" inches long on the inflatable part of this smb

Overall length is roughly 13" inches

Roughly 2 1/2" wide

Has a bungee to roll this little guy up and a plastic rotating clip to clip off and carry them

To blow these up you have to depress the inflator mouthpiece and blow into it! Simple release and its fill ready for your dive

We have these fun mini smb's to play with! These are very limited in stock right now so grab one and have some fun with them

They are roughly 9 3/4" inches long on the inflatable part of this smb

Overall length is roughly 13" inches

Roughly 2 1/2" wide

Has a bungee to roll this little guy up and a plastic rotating clip to clip off and carry them

To blow these up you have to depress the inflator mouthpiece and blow into it! Simple release and its fill ready for your dive

We have these fun mini smb's to play with! These are very limited in stock right now so grab one and have some fun with them

They are roughly 9 3/4" inches long on the inflatable part of this smb

Overall length is roughly 13" inches

Roughly 2 1/2" wide 

Has a bungee to roll this little guy up and a plastic rotating clip to clip off and carry them

To blow these up you have to depress the inflator mouthpiece and blow into it! Simple release and its fill ready for your dive 

Perfect little lanyard to clip off on items to secure to your diving rig

We use a 550 heavy duty para-cord with a 3/8" swivel bolt snap in 316 stainless steel

Overall length: 10 inches

Lanyard loop is 5 1/4" inch

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap

Well Piranha is now making male din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this male cap with an o-ring gland if you want to add one. Its a number 116 o-ring "This does not come with the plug"

This male cap protects your threads from getting damaged and keeps dirt from getting into your valve

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap to grip and turn it on or off

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap

Well Piranha is now making male din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this male cap with an o-ring gland if you want to add one. Its a number 116 o-ring "This does not come with the plug"

This male cap protects your threads from getting damaged and keeps dirt from getting into your valve

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap to grip and turn it on or off

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap

Well Piranha is now making male din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this male cap with an o-ring gland if you want to add one. Its a number 116 o-ring "This does not come with the plug"

This male cap protects your threads from getting damaged and keeps dirt from getting into your valve

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap to grip and turn it on or off

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap

Well Piranha is now making male din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this male cap with an o-ring gland if you want to add one. Its a number 116 o-ring "This does not come with the plug"

This male cap protects your threads from getting damaged and keeps dirt from getting into your valve

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap to grip and turn it on or off

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

This one will glow in the dark just hit it with your dive light or the sun and once it shine!

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap

Well Piranha is now making male din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this male cap with an o-ring gland if you want to add one. Its a number 116 o-ring "This does not come with the plug"

This male cap protects your threads from getting damaged and keeps dirt from getting into your valve

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap to grip and turn it on or off

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

Expose this to your dive light or sun light and it will glow in the dark! On a boat for a night dive? Your dive harness you be easy to spot with these on

The four outer holes fit a 3/16 bungee or latex tubing

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

Well Piranha is now making female din caps in a wide range of colors. Know your stuff and have your color to dress your rig the way you want too

We designed this cap so the o-ring on your regulator will fit snug inside and keep your threads protected

This cap protects your threads from getting damaged and keep dirt from getting into your first stage

We also include a 1 foot piece of line so if you want it

Also we have light knurling around the top edge of the cap